400-180-8189

精密空调

英特迪-精密空调

RCU/S/D系列风冷精密空调是专门针对大中小型机房、基站、设备间等场所设计开发的机房专用空调产品;本系列产品针对设备、环境要求而定制设计,具有大风量、小焓差的特点,直膨风冷机组冷量范围为7.5至100千瓦,特别适用于IDC、服|务器机房等的应用场合,同时产品的可靠性高、寿命长、高效、节能。...

免费询价

24小时免费咨询电话400-180-8189

  • 产品详情

空调类型/Air conditioning type:

  · 风冷直膨上送风式或下送风式。

  Air-cooled direct expansion, top air supply or bottom air supply.


应用领域/application area:

  · 数据中心(IDC)、通讯机房、大中型计算机机房、UPS和电池室、工业控制室、精密设备工作场所等。

  Data center (IDC), communication equipment room, large and medium-sized computer room, UPS and battery room, industrial control room, precision equipment workplace, etc.


标准单元构成/Standard unit composition:

  · 具有空气调节功能的室内或室外安装单元。

  Indoor or outdoor installation units with air conditioning function.

  · 由于镀锌板金属结构和粉末涂料涂层饰面面板,因而具有最强的防锈能性。

  Due to its galvanized metal structure and powder-coated finish, the panel exhibits the strongest rust resistance.

  · 压缩机和其他配件均采用世界上著名的公司品牌,比如谷轮的压缩等机。

  Compressors and other accessories are sourced from renowned global brands, such as Copeland compressors.

  · 双吸入离心式风机单元,直接连接并悬挂在隔振装置上。

  The dual-suction centrifugal fan unit is directly connected and suspended on the vibration isolation device.

  · 风叶为前倾叶片型,可实现最大效率及最低噪音。标准G4过滤器配置,F5-F8可选,符合CEN-EN779。

  The fan blades are of the forward-swept design, achieving maximum efficiency and minimal noise. Standard G4 filter configuration is provided, with F5-F8 options available, in compliance with CEN-EN779.

  · 规定,过滤效率达 90.1%,符合美国暖通空调和制冷工程师协会标准。

  According to the regulations, the filtration efficiency reaches 90.1%, which meets the standards of the American Society of Heating, Refrigerating and Air-Conditioning Engineers.

  · 微处理器遵循先起先停的原则控制压缩机启动次数,机组可将报警信号自动进行远程传输或接入用户端接收设备。

  The microprocessor controls the number of compressor starts following the principle of "start first, stop first". The unit can automatically transmit the alarm signal remotely or connect it to the user's receiving device.

  · 配电箱,符合IEC204-1/EN60204-1规定。

  Distribution box, compliant with IEC204-1/EN60204-1 regulations.

  · 机组的标准配置还包括,热力膨胀阀、高/低压安全开关、视液镜、干燥过滤器等。

  The standard configuration of the unit also includes a thermal expansion valve, high/low pressure safety switch, sight glass, drying filter, etc.


技术参数表/Technical parameter table: